YUANYANG CABLE YUANYANG CABLE

CN

PRODUCTS
YJV Insulated Power Cable
YJV Insulated Power Cable

Papua New Guinea YJV Insulated Power Cable

This product is suitable for power transmission in power lines with AC 50Hz and rated voltage of 0.6/1KV (the highest system voltage is 1.2KV).

Category:

Papua New GuineaLow Voltage Cable

Send E-mail

Contact

Product Description

Description of use

XLPE insulated power cable not only has excellent electrical properties, mechanical properties, heat aging resistance, environmental stress resistance and chemical corrosion resistance, but also has a simple structure, easy to use, not limited by the laying drop, long-term working temperature High (90 degrees), large transmission capacity and other advantages, XLPE insulated power cable products include a full range of flame retardant and non-flame retardant XLPE insulated power cables.

Executive standard

The performance of the XLPE insulated (flame retardant) power cable conforms to the national standard GB/T12706.1-2008, which is equivalent to IEC60502-2004, and the flame retardancy conforms to the national standard GB/T19666-2005.

Scope of application

★ System: This product is suitable for power transmission in power lines with AC 50Hz and rated voltage of 0.6/1KV (the highest system voltage is 1.2KV).
★ Occasion: Laying in metallurgy, electric power, construction and other industries indoors, cable trenches, pipelines, direct burial and fixed use occasions that cannot withstand mechanical external force.

Use features

★ Rated voltage: The rated voltage of power frequency AC is 0.6/1KV, and the maximum voltage of the AC system should not exceed 1.2KV.
★ Working temperature: The long-term allowable maximum working temperature of the cable conductor is 90℃. During short circuit, the maximum temperature of the cable conductor is 250℃, and the duration does not exceed 5s.
★ Ambient temperature: The lowest ambient temperature for cable operation is -10℃.
★ Laying temperature: When installing and laying, the temperature should not be lower than 0℃.
★ Bending radius: recommended minimum bending, single-core cable bending radius does not exceed 20D, multi-core cable bending radius does not exceed 15D.

previous:

Papua New GuineaYJV22 0.6/1KV Low voltage power cable

Papua New GuineaVLV22 Insulated Power Cable

: Next